Learn How to Make Solar Panels steps by steps. Solar Panels is systems that help us to cut down electricity bills, It help us to save the environment and solar panels systems also crate huge job opportunity for the people.Learn How to Make Solar Panels For your Home.
If you are planing on installing solar panels and have been checking out the prices for new ones, you will know that they are not cheap. New solar panels can run you a few thousand dollars for a single panel plus you have to pay for installation. But there is now a easier way, you can learn how to make solar panels for all your home energy.
Making your own solar panels is not as hard of a task as you may think, I did it and trust me I am no one bit of a handyman and do not have a technical bone in my body.
An easy to follow guide book to making solar panels
Sheets of plywood
Bargain-priced solar cells
Glass panes
Roll of copper wire
An easy to follow guide book can be found online for around $50 - $70, just remember cheaper is not always better cause you get what you pay for. Most of the really great guides out there will also give you plans to make a wind generator as well because they both go hand in hand with regards to renewable energy.
The guide book that I had gotten and reviewed, contained info on how to make our own solar panels as well as detailed instructions on how to install solar panels. There were picture diagrams and step by step instructions which really sped up the process. The guide also gave me a source of inexpensive solar cells.
It only took me a day to make a 100 watt solar panel with some help from my wife, and the total cost was $165. A new commercial 100 watt solar panel can run in the $500 range or more so you can see you will save a lot of money. It is well worth learning how to make solar panels for home energy.
Learn How To Make Solar Panels - Save Energy, Save Money, Help The Environment
By Brian D Morgan
Making solar panels is easier than you might think, and for people trying to create energy for their own use, you can get your money back within a number of weeks or even days. A solar panel links cells that create currents to store and releases it as electrical energy. It is easy to build the cells from scratch, but when making solar panels the best idea is to follow a guide that can help you with the electrical side side of things especially.
For most home owners making photovoltaic cells, amorphous silicon or crystalline units will be required.
How to Make Solar Panels
Don't use those dipped in wax as they will be harder to work with and less effective. Other types of material will need to be bought at the same place to get started right away.
Tabbing-wire, ribbon-wire, flux-pens, solders, eva-glue, waterproof-encapsulaters, blocking diodes and the boxes for housing are easily available to make the project easy. Anybody can take short cuts if you buy an already built solar panel. With these materials making solar panels will only take you 1 -2 hours.
Lay out the cells into a 6×6 format and glue them to a backing board. Then solder the tabbing-wire in order to link the cells with the blocking diodes at the end to prevent the chance of electricity going back from the storage battery at night when the cells are deactive.
Set this up in a box keeping the reverse side well insulated, and cover the top with a clear plastic lid to keep it water proof. Adding silicone-grouting will make the entire unit even more water proof. All you need to then do is to link the wiring to a storage-battery, A 12 volt unit which is very effective and easy to build is recommended.
This may sound too easy to be true, well to be honest it is! Kit's are available with blueprints and instructional-videos that make the job of making solar panels even easier. The sun provides a constant supply of power which can be harnessed to fulfil household electrical electrical requirements through this easy to follow system.
People who take on a project like this care about the environment. A side benefit is that while you are doing something positive for the environment you are also saving money. You are no longer dependent on an electricity provider because you generate your own energy and most of all it can be fun!
There are so many company that teaches How To Make Solar Panels, But it is very important to choose the one can teach you steps by steps.
How to Make Solar Panels - 3 Steps Found in Solar E-Books for Generating Electricity From the Sun
By Timothy Lancester
Solar e-books provide valuable information, instructions and guidelines on how to build a solar panel to generate electricity from the renewable resources of the Sun. Instructions provide easy-to-understand schematic drawings that allow any do-it-yourself individual the ability to construct both simple and complex solar power systems. With the continuous rise in costs of conventional fossil-fuel produced electricity, it makes sense to seek out alternative avenues to save on your utility bills without altering your lifestyle. With the availability of inexpensive photovoltaic cells, the working heart of any solar power panel, it is now possible to construct your own basic single solar panel, whole house system or anything in between.
How To Make Solar Panels
While it may seem challenging to figure out the complexities of converting energy from the sun into usable electrical power, pre-manufactured photovoltaic solar cells simplify the entire process. Without any movable parts, the solar cell automatically converts the Sun's energy into valuable electricity. The only other two main components necessary to collect that energy is to fabricate a container to house the solar cell and wiring to move that electricity to the lighting or appliance you want to run. The container, or module, typically has a sheet of glass on the working side, or sun-side of the unit, which allows sunlight to pass through to the protected wafers of the semiconductor of the solar cell. By using the following simple steps, you can reduce or eliminate your monthly utility bills.
Invest Yourself in the Process - Key to the process is gaining a thorough understanding of how this simple system works, along with the materials needed to assemble a solar panel. Numerous Do-It-Yourself websites offer instructional steps and schematics, laying out all necessary information for building, installing and maintaining a solar power generating system. Included in these guidelines are different efficient ways to construct your system, both with or without using a battery. Building one or more DIY solar panels immediately provides you with electricity to begin lowering your monthly utility costs.
Solar Panel Construction - Most of the materials needed to assemble your first solar panel module can be found locally at your home improvement center. High-quality photovoltaic semiconductor solar cells are available directly from the manufacturer, or can be bought on the Internet at greatly reduced reasonable prices at online auctions, such as eBay. Most do-it-yourself individuals can assemble, install and begin using a single panel in just a few hours. Most instructions include how to construct the panel to be used in a fixed location, or offer portability to be used on camping trips or in remote locations.
Going Totally "Green" - The ultimate design for those interested in living totally "green" is to fabricate a whole house solar power panel system capable of generating enough energy to supply all the electrical needs of your home, both day and night. Though this sounds complicated, a whole house system is nothing more than a group of simple single solar panel units connected together. By connecting a group of modules, or individual solar panels, in a series, you can produce an additive voltage. The connected cells, in a parallel yield a much higher electrical current. One of the luxuries of creating your own solar power system is the ability to build your whole house system a little at a time, as you can afford it. Schematic drawings will show you how to include a battery system large enough to handle and store this excess energy to be used after sunset. Additionally, a great money-saving solar panel design is to feed any generated electricity, not immediately required, directly to the local utility grid, using inverters. Known as a grid-connected photovoltaic solar power system, you can simply use the grid to store your power until it is required, such as after sunset. Building a large system can also provide you with a monthly income, by producing electricity not needed to support the energy requirements of your home.
Times being what they are, rising fuel costs create the need to become invested in looking for alternative ways to generate electricity inexpensively. Being able to harness free energy from the renewable resource of the Sun not only helps manage your monthly utility costs, but also helps save the planet. A well-built do-it-yourself solar power-generating system can last for decades, with no additional costs once the unit has been manufactured and installed.
Knowledge of exactly how to build these different highly efficient systems can be found by downloading this solar e-book on DIY Solar Power Panels. Additionally, you should seek out information on how to construct a solar hot water system to support the heated-water laundry and bathing needs of your family. Also, generating electricity using windmills is a creative and inexpensive way to use the natural resources surrounding your home every day.
Timothy Lancester has devoted a large portion of his free time to seeking out quality information, instructions and guidelines on how to build DIY Solar Power Panel Systems, electric-generating windmills and solar water heating units. As a "green-minded" environmentalist, he enjoys sharing his valuable information with all like-minded individuals interested in reducing their utility bills and helping to save the planet.
Using Solar panels panels you can cut down your power bills for forever. Learn How to Make Solar Panels on your own. Review to choose the best company for make solar panels you own.
Solar power is probably the cleanest, most viable form of renewable energy available and it can be used in several forms to help power your house. Many gardens now use solar lights or solar garden water features. The availability and wide use of solar power in gardens shows exactly how versatile it is as a source of energy. The technology and the systems are becoming smaller, more compact and better looking than when they were first created and used. Early examples of solar power systems can be seen in California where, in the 1980s, enough solar power panels were installed to power over 10 million homes.
Simply put photovoltaic tiles and other forms of solar energy work by converting some of the energy in sunlight into a clean form of electricity that can be used in our houses. The PV cells consist of a positive and a negative slice of silicon placed under a thin slice of glass. As the protons of the sunlight beat down onto the PV cell they knock the neutrons off the silicon. The negatively charged free neutrons are attracted to the silicon but are trapped by the magnetic field that is formed from the opposing fields. Small wires on the silicon catch these neutrons and when connected in a circuit an electric current is formed.
This reaction gives Direct Current electricity though, and it must be passed through an inverter to be converted into an Alternating Current used in our homes to power any electrical items. Some of the power is lost in this part of the process as the inverter is only around 95% efficient but this is a much greater efficiency than was once available.
The nature of the PV cell means there is little or no maintenance required and there are no moving parts; this means that a typical PV cell can last up to 40 years with no work besides an annual clean.
How can I use them to power my house?
There are several ways to use solar power around the house and not just for powering. You can use it to heat your hot water, heat your pool or even your central heating or if you have plenty of roof space and a reasonable amount of sun you can get a grid tie system; a grid tie system means that not only can you power your entire house but during those times when you create an excess of electricity you can sell it back to the grid. An efficiently solar powered home will be able to reasonably create between 75 and 100% of their own power and because of the grid tie system this means you may not have to pay for electricity ever again.
It might be a great idea to make solar panels your own. Some times it hard to find a company that teach you How To Make Solar Panels. Cut down your electricity bills. Learn How to Make Solar Panels Steps by steps.
How to Make Solar Panels - Can I Build a DIY Solar Panel at Home?
By Ferguson McHenry
Solar panels are readily available, and have been for some time. However the costs of purchase generally outweighed the cost savings. That's starting to change now with the introduction of DIY solar panel kits and blueprints. Now anyone can build these at home, with just a little know-how and guidance.
How To Make Solar Panels For your Own Home
How difficult is it to build solar panels?
You have two options if you want to build solar panels.
1.Buy a solar panel kit, readily available online.
2.Buy a guide on how to make solar panels. These are available on the internet, and include blueprints and instructions. You'll also need to buy parts from your local hardware store.
Below I've given a brief introduction of the process you will follow in creating a solar panel. This is a rough overview, that should give you an idea of whether you're ready to buy a guide or kit and take the project on yourself.
To get started, the first thing that you'll need are solar cells.
What are solar cells and how do I make solar cells?
Solar cells are made of metal and some other supplies that can be purchased easily. It's beyond the scope of this guide to show how to make them, pick up a guide/blueprint or just a kit if you don't want to build them yourself.
This is the hardest part of the process, and it's a good idea to have some kind of engineering expertise before attempting the project.
What you will need to do to make your solar panels:
First, assemble the photovoltaic (solar cells) that you've purchased. At that point it's simply a matter of assembling them. The first key is to find a good location. Here are some examples of commonly used solar cell locations:
1.Backyard
2.Roof
3.Patio
Pretty much anywhere with a lot of sunlight will work. The next trick is to put your cells together to make sure they're facing the light. Again, this is easier to explain with a diagram, refer to the links in the resource section for places to get those.
After that, you need to put the cells together, and connect them to your power source. For this you'll need some long lengths of wire.
So can I build a solar panel at home?
The answer is yes, and parts are becoming cheaper and plans are more widely available. As you can see above, the steps needed to build a solar panel at home are not terribly complicated. If you're confident with tools and do-it-yourself projects, this could be a fun thing to work on.
Solar Panels panels systems will provide you how to cut down your electricity bills and think about saving the earth. Learn How to Make Solar Panels for your home.
Building your own solar panels has never been easier. With new building techniques, making your own power is now a reality. Today we have better quality solar cells that can be purchased at reasonable prices to keep your building cost to a minimum. If you are wondering what it takes to build your own solar panels, then look at the list I have compiled for you. Here are the items you will need to make your own solar panels.
Aluminum frame-I like to beef up my solar panel by purchasing 1/8" aluminum angle in at least 1" dimension, so that they will last for thirty years or more. The frame is to be the strongest part of your panel, so no skimping here.
Tempered glass-One thing that I learned about building solar panels, tempered glass is the best for making a system that will last and withstand all types of weather from hail storms, heat, and cold. I recommend 1/4" for strength and durability. Another good point to make here is that all your soldering can be done on this tempered glass which makes an excellent heat sink.
Soldering tools-What I have found is that a soldering iron of 40 watts works best for soldering your tab and buss wires to your cells. It is good to have extra soldering tips available, because you will be replacing them at one point during your soldering process.
Hardware-You will need miscellaneous hardware such as 1/4" machine screws, 1/4" nuts, 1/4" lock washers, small angle brackets to join your corners of the aluminum frame together, and angle brackets to hold your glass in place.
Eliminate your dependency from the power company and generate your own solar electricity from the sun's energy.
Making a small solar panel or large solar panels for a home power energy system will save you money, save the environment, reduce toxin carbon gases and power your house with free solar electricity.
With the cost of living skyrocketing and fuel prices near record highs any savings for the family budget is welcome. The perfect solution for you is learning exactly how to generate this power and reduce your bill.
You should give some serious thought to building your own home solar system by making solar panels creating your own green solar electricity from renewable energy as an alternative to fossil fuels.
Solar panels sold by the retailers cost thousands of dollars when you can simply make your own solar panels for less than your last electricity bill. You will be amazed at how simple and easy the whole home power system is to set up.
You can find great detail to explain where and how to source the materials and most important where you can pick up deep cycle batteries to use in your solar system sometimes for free or very cheap from the internet or purchase one of the many how to make guides.
Full solar panel system for the home generating your own solar power would be an enormous saving after the initial set up costs.
The main reason for making solar panels is to generate more power [electricity] than the home appliances use.
What your electric company doesn't want you to know is that you can spin their meter backwards by knowing how to create your own solar power
The greatest demand for power is between 4pm through to 7pm when dinner cooking and water heating is at its premium. It's the time when solar panels are not producing any or very little power. This is when you ask yourself whether to go completely off the grid or stay connected.
Off the grid means you need an alternative method to power the house and this is when batteries and inverters are use to give the necessary electricity. A whole discussion on its own.
Option two is to stay connected and use the power from the electric company. Where is the saving when using this power?
During the day the solar panels produce the electricity that runs the house when the demand load is small and if your power system is larger than the electricity you are using, you then put power back into the grid earning you power credits that come off your power bill. Hence the saving staying connected to the grid.
The whole process of building a complete home solar system with solar panels is very easy to understand and you require absolutely no knowledge about power engineering to make solar panels for the home power systems but a qualified tradesperson is required by state laws to connect into the house power and meter switchboards.
Solar panel array build into the house power system has the benefit that you can add more solar panels when time and money allow.
All this important information is available from various energy sites and you have to be careful about which ones you choose as some are insufficient in supplying the correct information you require to complete your home solar power systems
Given that it's proven to decrease the power bill by as much as 80%, in some cases even completely eliminate your power bill, you could well recoup your investment within 3 to 4 power bills.
Benefits Making Solar Panels
1. Offer Low Maintenance. 2. Clean, quiet. 3. Consume no fuel and give off no waste. 4. There are no moving parts, no mechanical noise. 5. Generate D.C. electricity, safe and reliable. 6. Protecting the environment by going green. 7. Live off-grid and reduce your power bill. 8. Make the power company pay you. 9. Save your money for other important needs. 10. Replace their electricity with your free solar power.
Your electric bill will become non-existence.
Let's face it some commercial solar or wind power system can easily cost you in excess of $15,000 and compare that to a do it yourself power system and you will realize that you can avoid expensive solar systems and setup costs, and enjoy savings hundreds of dollars in power bills each year.
By acting today, the power system and solar panels will pay for itself in 3 or 4 months.
In the world of new solar panels design, the traditional chemical techniques are due for a change. Solar manufacturers and chip makers have traditionally employed nitrogen triflouride to apply chemical layers in special chemical vapor chambers.
How To Make Solar Panels
Saying that nitrogen triflouride is a harmful chemical is an understatement. Although the special chambers used are technically vacuum types, some gases are going to escape. Changing (NT) up with fluorine will lowers greenhouse gas emissions.
Some companies have changed over to fluorine control systems for some of their solar panel lines. These new solar panels design companies also claim that fluorine reduces processing and cleaning time. The important thing is that these procedures reduce emissions while influencing the down ward cost of the panels.
There have been a few brow raising announcements in factory chemistry. A known company started selling a silicone encapsulates for solar panels that it says speeds up the factory throughout (cutting panel costs) and protects panels better than normally used encapsulates
Some companies have also taken out some of the weight from their solar panels by swapping out glass for a flexible film. A San Jose, based company is targeting the commercial and industrial flat-roof market with applications that favor a lightweight, non-penetrating flexible solar snake. The Solo Power panel can be rolled up and walked on." Woof"
At least one company is shipping panels with 6 percent to 6.6 percent efficiency. The panels make use of a layer of amorphous silicon to convert sunlight into electricity. Shortly the plans are to start making panels with two layers of amorphous silicon, and their CEO expects the efficiency to register around 7 percent to 7.8 percent.
Slow but sure, solar manufacturing companies are dragging themselves out (excuse the pun) of the dark age of using outdated chemicals, and manufacturing processes systems. They are doing this by investing in new technological research programs so they can not only improve the methods of production but the product as well.
You are the reason they're doing this when you decided the new solar panels design was the perfect compliment to your home built wind generator system, and then invested in solar power. Purchasing and installing those new solar panels, whereby increasing your independence from the grid,
Your purchases did a lot more than just freeing you from that monthly bill, Profit from the sales of solar panels encourages alternate energy companies to invest in all forms of solar panel research,While bolstering the companies confidence in future expansion and sales as well.
This goes to show you that not all companies are setting on their hands, using quid pro quo methods to produce get by solar products, so they can charge high prices and still act like they're doing you a favor.
There are some companies out there that are putting it on the line, the innovation of the product line, proves there hard at work. The solar products coming out of these companies stand heads and shoulders above the rest of the solar fly by nights.
Have you always dreamed of being able to create your own electricity? Have you always wanted to be able to say that you don't have to pay the electric company for power? Do you have a remote camp that has no power that you would love to have even something like a basic light fixture or television in? If any of these questions sound like you, then you need to learn how to make Homemade Solar Panels.
A lot of people think about making Homemade Solar Panels and don't think it is possible. However, it is entirely possible. In fact, it is not difficult at all. Sure, you aren't just born knowing how to make solar panels. However, there are products out there that can teach you how to do it. Most only give you a vague overview and then you are on your own though. Just imagine a product that will take you step by step through the building process, wouldn't that be terrific?
Well, this product has the ability to teach you how to make your own Homemade photovoltaic cell. It will take you step by step through the process of making them. Then, it will guide you in knowing exactly where you should place those solar collectors. Once you have that figured out, it will teach you what you need to know to get your energy from the panels to a storage location and finally to your home's power outlets. All of this will be explained in detail so that you can understand it.
This sounds incredible right? Wouldn't it be fantastic to never have to write out a bill to the electric company again? Wouldn't it be great to watch a movie on a television while at your hunting camp? How about the ability to know your home is completely self-sustaining? That in itself is pretty incredible. Whatever your reasons are for wanting to make your own Homemade Solar cells, this product can teach you how to build them and use them from start to finish. It is time to get started on your solar panels and see just how easy it can be.
We're in some tough economic times, and I'm sure looking at your monthly electric bill isn't helping. Well, you could cut that bill in half with eco-friendly DIY solar panels.
Harnessing the energy of the sun to power your home comes with numerous benefits.
Solar energy is perhaps the most renewable resource we have, and using it doesn't involve any toxins entering the atmosphere. Scientists have been researching solar-powered energy for decades.
And of course solar energy is always free. The sun is a tremendous source of natural energy so why not put it to use in your own home?
You'll soon reap the benefits of powering your home appliances and electronics with solar energy. You could reduce your energy bills by as much as 80% with solar panels, not to mention that it's a renewable energy source and you'll save even more money by constructing the solar panels yourself. The cost of solar paneling is consistent as well.
I'll bet you're eager to learn more about solar panels and the money-saving opportunity they create.
Why not reduce your electrical bills while making your home eco-friendly? Many people all over the country are already investing in home solar energy.
Never again will you have to deal with the rises in energy prices. And you can kiss non-renewable energy sources goodbye forever. Solar power systems mean freedom, and these simple systems that harness natural energy rarely suffer power outages or any of the other many inconveniences that come with being bound to the electric company.
Not only will your reduce your carbon footprint and help combat global warming but there are also tax credits for using green energy in your home. America in particular has a wide variety of grants, rebates and tax reductions available to households and businesses that make use of solar energy. You can even sell some of your own solar power back to the grid. Just picture that: the electric company paying you for a change!
Find out more about the new energy focus, the solar panels. Acquire wealth of information on how solar panels work, benefits and many other informative tips on saving electricity. Learn how to make solar panel today; Master the true knowledge of generating free energy.
How to Make Solar Panels - Making Your Own Solar Panel at Home
Solar panels are available in the market today, which are made of high quality and processed silicon. However, plenty of people are now looking on how to make solar panels for their own projects, residential or home use, and is ideally suited to a small household.
Is it difficult to make solar panels?
Solar panels can be easily made at home by making use of diy (do it yourself) homemade solar panel guides, which are available on the internet today, or making use of kits which are easily available at electrical stores nowadays. Those who have prior experience in fixing up electrical equipments at home will find this task of making their own solar power panel at home extremely easy, although if you have a good guide, then there should be no problem.
If you already have solar cells :
The first and foremost requirement is to make use of photovoltaic cells. These cells are extremely light in weight, and are easy to transport from one place to the other.
You then need to choose on where you plan to make the solar panels and install it. Ideally, the backyard, garden of the house, or a flat rooftop are the correct places to install the solar panels, because they are the places that can receive the largest amount of sunlight available.
When you have chosen the right location, you can then start with the process to make solar panels. First, place the photovoltaic cells on the floor of the roof, garden, or the backyard, or whichever place you have chosen in making your own solar panel. These cells needs to be stacked one after the other in a horizontal arrangement, and should be installed at such an angle from the sun that it will be able to capture the maximum amount of sunlight and store it inside.
How do I get started in making a solar cell?
A solar cell makes up a solar power panel, so you need to know on how to make a solar cell. The required components in making your own solar panel are :
- sheet of copper
- two alligator clip leads
- a micro-meter that is sensitive enough to read currents between 10-15 micro-amperes
- an electric stove
- table salt, tap water, sand paper, and sheet metal shears
Now you need to cut a piece of the copper sheet with the exact size that of your electric stove. Thoroughly clean the copper sheet for any possible traces of sulphide or other corrosion.
Heat it on the burner and when it gets red-hot, the copper sheet will undergo color changes from pinking red to brown, and finally becoming a thick layer of black coat over it.
Then the stove and the copper sheet should be cooled off gradually. A layer of soft red cuprous oxide will be left over the copper sheet. Resist the temptation of removing all the black spots since this may damage the red cuprous oxide which is needed to make the solar cell work.
Then this sheet of copper should then be joined together with another sheet of copper of the same size. Use the alligator clips to join the two sheets together, and place it into a wide-mouthed jar or bottle. Ensure that the two sheets to not get in touch with each other. The copper sheet with red cuprous oxide should be connected to the negative terminal, and the clean copper sheet can be joined to the positive terminal. Saltwater should cover the bottom of the plates, but the clips of the two sheets at the top should be left dry.
The above procedures addresses the question on how to make solar panels at home. This can be used to generate electricity from the heat of the sun.
Now how does it do that?
The red cuprous oxide is a material type called a semiconductor. A semiconductor is an insulator, where electrons are bound tightly to their atoms and do not flow freely, and a conductor, where electricity can flow freely.
There is a gap in a semiconductor called a bandgap between the electrons that are bound tightly to the atom and the electrons that are farther from the atom which can conduct electricity and move freely. An electron must gain enough energy to move farther away from the nucleus outside of the this gap, since they can not stay inside the bandgap. And an electron outside that gap cannot lose a bit of energy and fall closer to the nucleus, and must lose enough energy to fall past the gap into the area where electrons are allowed.
When sunlight hits the cuprous oxide, it also hits the electrons. Some of these electrons gain enough energy to jump past the bandgap and become free to conduct electricity. These electrons then move into the saltwater, then into the clean copper sheet, into the wire, then through the meter, and then goes back to the red cuprous oxide sheet, and electricity is now generated. Now that you know on how to make solar panels, you can then make your home solar friendly, and cut your monthly electricity bills.
Do you know that plenty of people are now making their own solar panel for their home? Learn Here More About How To Make Solar Panels for your home
The solar panel's ability to create electricity is amazing, and can even power your entire home. There are many reasons that people in residential communities begin looking into solar power. One of the reasons is because once a solar panel is installed, there's very little maintenance involved in using them. So, after the initial cost is taken care of, you don't have to worry about pouring more money into them.
And what can be more cost-effective than a free source of energy like the sun? Figuring out how to make your own solar panel for your home or business can give you a power supply that can last another four billion years into the future. If the sun isn't the answer to the power dilemma that fossil fuels has put us in, then what else could be?
In recent years, the technology behind solar panels has improved drastically, especially since the price of other energy forms have risen just as drastically. Solar power systems for the home is the most common method that homeowners use to take advantage of all that sunshine. These systems take the sun's energy and change it over into electrical power. And once that solar power system is hooked up to your home, the energy it provides will power everything in your home. You can find out how to build your own solar panel today, and get your home one step closer to going green.
If people ever hope to rid ourselves of global warming, then we all have to start doing our part. It's really quite easy to install one at the comfort of your home. You just need an all-inclusive kit that comes with everything you need to build your own solar panel.
Reasons why you should have a solar panel for your home:
1. Taxes - Your local government might offer you a rebate if you have one!
2. Savings - Never worry about huge electricity bills again!
3. Free Power - You can power the appliances in your home for free!
4. Affordable Power - Never worry about the cost of your power bill going up.
5. Going Green - This will help make your home more environmentally friendly.
6. Home Value - The value of your home will go up!
ow to Make Solar Panels - 5 Steps to Saving Big Money With a Homemade Solar Power System
Our fossil fuel reserves are diminishing at an alarming rate. Most analysts predict that oil will be depleted in 30 to 40 years and coal by the end of the century. However, more importantly, the rate at which oil and coal can be extracted from the Earth is falling behind world energy demand. Shifting to renewable energy sources is essential if we are to continue to grow our economy and prosper.
Photovoltaic solar panel systems manufactured and installed by professionals will cost the homeowner thousands of dollars. This is beyond the financial capability of most individuals. However, there is a much cheaper approach available to DIY homeowners. This article will explore how to make solar panels for home use and reduce dependence on the local utility.
Make Solar Panels
1. Buy a guide - Better still, find a free guide. While building a solar power system may not be rocket science a good DIY guide is essential. A quick search of the internet will reveal many good guides that will enable the average DIY homeowner to build a cheap solar power system.
2. Purchase cheap solar cells - With solar panel manufacturing at an all time high there is an abundance of solar cells and panels that are rejected by manufacturers for minor flaws but which are otherwise fully functional. These can be obtained cheaply and refurbished to make a fully operational solar power system which will run for many years.
3. Build the panels - Panel assembly involves joining several cells in series using simple soldering techniques. A sheet of plywood with a weather proof coating applied is used to support the array. A layer of glass is then placed on top and sealed with silicone to protect the panel from the elements.
4. Install the panels - Installation involves placing the panels in a South facing location and hooking it to a battery via a device called a charge controller. A roof or an open space in the yard are excellent choices.
5. Connect the panels to the house breaker - To connect the system to the household electrical system an inverter is required to convert the low voltage direct current (DC) from the battery to the high voltage alternating current (AC) used to power household electrical equipment.
So there you have it. Learning how to make solar panels and installing a solar power system is not rocket science. Average homeowners are building solar panels every day and substantially reducing their utility bills. You can too.
If you have been harboring thoughts of building your very own solar panel with a small budget, then you are in the right place. Before you begin, there are quite a few things to bear in mind, and of them is being open to trying new stuff and this will definitely increase your chances of achieving your goals. The making of your own solar panel can be done with the help of your family members and thus, it can be a great cohesion day altogether. In addition, the use of a solar panel can help you save a huge sum of money and also protect the environment at the same time.
Take a look at some of the many benefits home solar power systems can provide you and our environment:
o Green energy: When you use solar energy, you will realize that it uses absolutely no fuel other than the sun's light. Moreover, it does not release into the atmosphere anything harmful.
o Affordability: Energy comes free. The installation cost is a one-time cost. Therefore, the investment is recovered within a few years of installation, making the power generated by solar energy absolutely free.
o Ease of use: You cannot store conventional power but you can store solar power for future use.
o Low on maintenance: The home solar power systems are easy to maintain. They do not involve high costs or too much effort, thus letting you reap the benefits of the solution comfortably.
o Free and renewable: With solar energy, you can lower or even eliminate your monthly electricity bills.
o Increase the value of your property: The price of your house tend to worth much more with the implementation of solar power systems.
o Make Money: You can sell your excess generated electricity back to the utility companies.
Basically, solar panels are dependent on sun energy to function; therefore, the most ideal location to position your panels is none other than on the roof of your home. However, there can be also other alternative locations such as on an empty piece of land that is close to the main area. The main point to take note here is that the solar panels have to be accurately angled to face the sun's direction. This is to ensure that the solar panels receive maximum exposure to direct sun rays.
There are tons of companies out there selling DIY solar installation guides and this has made the installation process of solar panels cheap and very much efficient. With step-by-step instructions provided along with video tutorials, learning how to build a solar panel has never been easier than this approach. The cost for this DIY installation guides costs at a reasonable price of no more than $50 and the overall costs for the materials required for the building process won't take more than $200.
The energy from the Sun is absolutely FREE! No need to pay for costly electric bills when you have an alternative. Try to learn how to make solar panels for it is the best way to power up your home. You may not know it, but these solar frames are made up of cells such as the photovoltaic cells. PV cells collect the energy from the Sun and transform it into electricity or convert the same to heat.
The so-called photovoltaic effect was discovered in 1839 by then 19-year old Alexandre-Edmond Becquerel. However, the lad did not how to harness the solar power using the PV effect. Solar energy was put into use by Charles Fritts who successfully made the first solar cell in 1882. The first solar energy catcher was made of thin Selenium sheets coated with gold. Utilizing the cell for producing electricity and generating heat had been widely used since the early part of 1900.
How To Make Solar Panels
The term photovoltaic effect actually pertains to the physical process that the cell has to undergo to convert sunrays into electricity. Solar panels come in many various shapes, sizes, and styles so they can be applicable to as many different types of spaces, appurtenances or structures such as awnings, roofs, buildings, apartments, greenhouses, condos, residential homes or fields.
No matter what the shape or size is, there seems to a common pattern on how to make solar panels. Depending on the kind of materials used in the making of the energy frames, you can come up and make money with the following form such as the:
Amorphous Silicon Panel
This class has the lowest electricity return rate in comparison to any type of sun-powered generator. It is not made with crystalline silicon thus its electricity return rate is just between five percent to six percent. The Amorphous silicon panel comprises of a piece of semi conductive metal such as copper and a thin strip of silicon on top that is connected to some pieces of metal.
String Ribbon Silicon Panel
The string ribbon type is built just like the polycrystalline silicon pane with about the same rate of electricity return. The difference between the two is that the photovoltaic cells in a string ribbon silicon panel is made up of thin strips of silicon which are attached to metallic bars connecting the strips to make one cell rather than using a solid silicon square.
In terms of investment cost, the price of a string ribbon silicon panel is lower than that of a polycrystalline silicon panel. You might want to know how to make solar panels with string ribbon silicon because of its tempting cost.
Polycrystalline Silicon Panel
From the Greek word poly which means multi, the polycrystalline silicon comprises of multiple individual photovoltaic cells with metallic conductors tucked at the sides of the panel for better conductivity and to help excite electrons. The panel renders electricity return of approximately twelve percent to fourteen percent. It is also observed that this type of panel is not as efficient as the Monocrystalline type of silicon solar panel.
So far, this is the cheapest kind of solar panel and makes it too easy for consumers to buy. Its maintenance cost is relatively lower compared to that of the Monocrystalline solar panel for the simple reason that you just replace or repair the individual cell that has been damaged without the need of replacing the entire panel.
Monocrystalline Silicon Panel
Mono means single, thus this made up from a single-crystal sheet of silicon with metals tucked to the ends to excite the electrons and to increase conductivity. This type is tested to be more effective and can be considerably more expensive compared to the others, but it can return fourteen percent to eighteen percent electricity rate.
Your questions, comments, suggestions or recommendations on how to make solar panels with photovoltaic effect are WELCOME! Thank you for reading.
Solar panels are increasingly gaining popularity these days. For years, we have been using fossil fuels and other non renewable resources of energy. These scarce resources have been exhausted to a level where everybody is complaining of imbalance in environmental conditions. Geologists say that most of the natural disasters and the global warming are a result of human errors like enormous forest cutting, soil erosion and other similar activities.
This concern led to the finding of some renewable source of energy to save earth and serve as a cost effective method. This paved the way for solar panels that capture the heat of the Sun and convert it into electrical energy. This energy can be further utilized for our daily chores. It is a reliable, long lasting and a very cost efficient method that will save us not only from the irritating power-cuts but also from the huge electric bills.
The invention of solar panel was the result of a discovery in 1954 that stated the capacity of silicon to convert sun's energy into electric energy. Thus it was formed using photovoltaic cells (solar cells) containing silicon and these PV cells take care of the entire process of converting sunlight into electrical energy.
The best thing about solar panels is that once installed, they need little maintenance and cover up their initial cost in a few bills only. More the sunlight, greater will be the efficiency with a great life span of almost 20-30 years. Probably this is the reason why more and more people are adopting this method of power generation. After all who would not like to have an uninterrupted power supply and that too at a minimal cost.
With the rising popularity, the utility of solar photovoltaic cells is also increasing. Varied ways are being devised out where this alternative source of energy can replace the conventional methods. They are used for space crafts, solar heaters, solar cookers, battery chargers, cell phone chargers and I-pod chargers as well. Rather, one can charge the batteries using solar panels and can use them for power consumption in household, office or even on their recreational vehicles.
These cells can be customized as per the need of the client. More the power is required; bigger will be the size of the panel. Though a few people try to make solar panels on their own, it is always better to take a professional help. A professional guidance can help you understand how and where to place them so that one can get maximum benefit out of it. The professional can also explain that how a little effort like timely scratching of the dust and scrap from the panel can elongate the life and maintain the quality as well.
The concept of climate change has become a real, present danger, as evidenced by the major shifts in temperature and weather all over our planet. Although it is too late to stop it now, it is possible to keep things for getting worse. One major way to do this is to encourage the uses of alternative energy sources, instead of using fossil fuels to power our factories, cars and homes. These non-renewable, dirty, expensive energy sources can be replaced by other technologies, such as solar power. Solar power is produced by using solar panels, which are essentially conversion and storage devices for capturing solar energy and turning it into usable electricity. Many people want to do their part in saving the planet and saving themselves money on their light bills, too, but they know little about this important technology. Here are some key factors and concepts involved in the usage of solar power and panels.
Make Solar Own Solar Panels
Cost factors. The cost of a solar panel can vary widely; some people make their own, while others choose to buy pre-made panels and have them installed professionally. How much sunlight a panel can absorb, the efficiency at which it operates, etc., are all factors to consider when trying to save money and the environment. Here are some criteria that should be considered for cost-effective solar power:
Level of Sunlight: Obviously, the amount of solar power you can use depends on the amount and intensity of sunlight available. If you live in a place that has low levels of sunlight year-round, such as the Pacific Northwest region of the US, you may only get direct, sustained sunlight for a few days per year. This would make installing solar panels not as cost-effective. In order to get the most out of solar panels in places with low sunlight levels, you have to install more panels, and they should be powerful ones with a large energy storage and conversion capacity.
Size of Your Home: If you live in a smaller home with fewer rooms and appliances, you will find you get more use out of solar panels with a lower output level. Solar panels for a small to medium-sized home will cost anywhere between $500-$16,000, depending on the tech level of the panels. However, if your house is big, exceeding 5,000 square feet, you will have to shell out a significant sum of money, even if you opt for less-expensive solar panels.
Government Grants: The governments of some cities and states offer grants or tax incentives for installing solar panels. Check into these resources to see if you are eligible and take advantage of them if you are.
Technological Advances: Solar technology has become much more advanced over the last several years, in terms of overall cost and conversion/storage efficiency. There are also much wider arrays of choices in solar panel options, so you can use this buyer's market to your advantage, to keep costs down.
The Advantages and Disadvantages of Solar Panels
Since solar power is renewable, safe, and pure, making it one of the most environmentally-friendly energy sources. It is free, but the cost of the panels themselves can be prohibitive in the eyes of many. Here are some pros and cons of solar energy/panels, to help guide your decision-making process whether to go solar or not.
Pros:
Solar energy is produced by the sun, which makes it "free"-the only cost is to collect and transform it into usable energy. Once you have the panels installed, they can be used indefinitely, and the energy produced is completely free.
Solar panels require little maintenance once installed, and can work efficiently for years without needing updates or changes.
Solar panels remain efficient, even long-term: most solar panels will still operate at p to 90% of their original output, even after 20 years!
Requires no work on your part to manufacture power, no wasting money on electric bills
Cons:
Large houses need lots of panels to manufacture enough energy to make them cost effective to install.
Solar energy only is accessible during the day, meaning your panels must also be efficient for storing the energy as well as receiving and converting it.
All panels will have to be replaced after about 20-30 years; if you installed a bunch of them all at once, they will have to be replaced the same way, which can get very expensive.
Reflect on these issues and determine whether solar panels are a good investment for your home and situation. Although they can be expensive to purchase and install, there are alternatives to pre-manufactured panels. Although they are expensive up-front, they can easily work off the cost of their purchase an installation over the years. Technology is improving every day, but you do have to have some up-front capital to get started going solar. Consider all the options and make the best decision.
Learning how to make solar panels is a sure-fire way of reducing your monthly utility bills and "going green". With the upward spiraling energy cost of conventionally fossil-fuel produced electricity, many residential homeowners are looking for alternative ways to reduce their energy consumption and create their own power through renewable resources. Individuals have looked into ways of how to build a solar panel, or construct an energy producing windmill and solar hot water system.
Reduce Energy Demands - There was a time when only the wealthy could afford to purchase solar power systems capable of generating electricity. For the rest of us, our only avenue to decreasing our utility bills was to reduce the amount of energy our family home demanded. Many chose to do this by raising the temperature settings for their air-conditioning, and lowering the heating thermostat. While this solved the financial dilemma, for many it made living conditions uncomfortable. However, because of the lowering costs of photovoltaic solar cells, the working part of a solar panel, construction of low-cost solar panels is now available to anyone.
Sourcing the Materials - Though there are different methods for building solar panels, most have three components. Those include the photovoltaic solar cell, which through no moving parts, can transform the rays of the sun into usable direct current electricity. To protect the solar cell, it is necessary to assemble a container for housing, along with all the required wiring to transfer the electricity from the photovoltaic cell to whatever needs electricity. Additionally, you can fabricate a solar panel using a battery for storage, to draw electricity from after the Sun sets.
Taking Small Steps - Even a complex whole house solar power system is constructed using nothing more than connecting a series of small single solar power panels together. Using easy-to-understand schematics and drawings, simple detail guidelines and instructions, any do-it-yourself beginner can build solar panels capable of running lights and appliances. Taking the initial step of solar panel construction involves teaching yourself how a direct current (DC) solar power generating system works. With this knowledge, fabrication of a single solar panel takes just a couple of hours. Placing the unit in the sun instantly begins generating electricity.
Expanding Your System - Once you are satisfied that you have created an operable single solar power panel capable of generating power, you can build multiple single panels and connecting them together in a series, to generate enough power to offset the demand of purchased energy. Because you can expand your system as large as desired, it is possible to increase the electrical output whenever you are financially capable of producing more panels. This gives you the freedom to create the system as you can afford it, and still instantly reap all the energy benefits as it grows.
Freedom from Fossil Fuel Power - Many dedicated do-it-yourself individuals have created a solar electric-generating system large enough to completely remove themselves from the national electric grid. Some homeowners have accomplished this feat through the construction of a few solar panels at a time, using the savings on their reduced electric bill to fabricate additional units, saving even more money for more panels. One method is to design the system using a series of batteries to collect and store unused electricity for any electrical demand at a later time. Another method, involves using the local utility power grid as a place to store solar panel generated electricity during the day, to be used after the Sun has set.
Saving money on utility bills can be accomplished by managing solar power-generating panel cost, and expanding the size of your solar electric-generating power system from the savings created by a single or small group of panels. All the information necessary to construct simple to complex solar power generating systems can be downloaded online simply by searching for " DIY solar power panels information".
Timothy Lancester constantly seeks out quality information on do-it-yourself home solar power panel construction. He recommends DIY Solar Power System information as a key source for detailed schematic drawings, guidelines, information and instructions on fabricating and installing your own solar panels.
One notable ingenuity of humans that has benefited mankind is developing the ideas on how to make solar panels. These are celled frames which are used to harvest the limitless energy coming from the Sun which will be transformed into electricity. Obviously, this is an alternative power source. Energy crisis has spread at a global range affecting even the mightiest nation. The natural resources of the Earth are facing threats of depletion due to their excessive use by human beings leading to damage against nature. The intellect of humans can cause both beneficial and disastrous effects to the environment.
Make Solar Panels
The discovery of the use of radioactive elements has implanted horrible marks in history. The devastating effects of the nuclear weapons are unquestionable. Nuclear plants, on the other hand, have been useful in huge industries that are offering service to mankind. However, disposal problem of toxic wastes has endangered ecology. Earth has not written an operating manual for living beings to run this planet.
Human beings are necessitated to make use of their knowledge through science and apply whatever discoveries made with the development of technology for their further existence on Earth. The invention which has turned into creativity on how to make solar panels is the answer to energy crisis. This has provided an important milestone to resolve the issue on the threatening scarcity of energy specifically to those who can no longer afford the surging tax rate imposed on power consumption.
Some households, office and small-scale industries have resorted to utilizing the energy from the Sun with the use of photovoltaic cells. There is a big disparity on the use of the free energy that nature has provided against the previous electric bills that must be paid regularly. Rationale behind nonpayment of bills is simple. No pay equals no electricity! Just like that - very plain and simple arithmetic. Resorting to an alternative power source contributes considerable ease and expected comfort in life with less dependence on the network grids.
The discovery of the photovoltaic effect putting it into practical applications has ignited the interest of people on how to make solar panels as the answer to the energy crisis. Building these energy catchers has offered tremendous benefits more particularly to mankind and to the environment in general. There are myriads of cyber sites on the internet that offer valuable resources about DIY solar panels.
If you are the type of individual who is endowed with creativity, then certainly you can make a feasible investment out of learning the craft to build and install these photovoltaic frames. Aside from getting the answer to the energy crisis, you are helping other people cut cost as well.
These energy catchers can supply relatively sufficient power to run electrical gadgets at home. Whether it is one rainy or sunny day, you always have electricity at home - or in the office or business establishment.
An alternative power source such as this is not confined only to homes or sheltered structures. Learning how to make solar panels in massive quantity is one way of preserving the life of your gardens or agricultural farms. Yes, living plants and animals need light too to energize them. In short, you can help save the planet Earth. And if every responsible person is into affordable DIY energy-saving projects the Earth can be rejuvenated once again.
A solar panel is a frame that contains cells that harness the sun's power to generate energy. This energy is converted to electricity, which can power up lights, electronic items and the like. You can buy ready-made solar panels but they come at an expensive price, which is why some people build their own panels.
Getting Started
Making solar panels yourself can be challenging, so you need to have patience and determination for this. In order to make a solar panel, you will need the following materials:
• Solar cells
• Plywood, 1 sheet
• Plexiglas, 1 sheet
• All-weather paint
• 1x1 inch lumber, 4 pieces
• Silicone sealant
• Solder and soldering iron
• Drill and screws
• Insulated copper wire, 2 strips
• Flat-tabbed wire
• Pencil and ruler
You can make your own solar cells but this will entail more time and effort. Just buy cells to make things easier for you and start working on the panel construction right away.
How to Make Solar Panels
Procedure
Now that you have solar cells, decide how many rows of cells you will need. This will help you determine the size of the plywood you need to cut. After cutting, apply all-weather paint and let it dry. Then you can apply a second coating.
After the second coating dries, use the pencil and ruler to draw lines to guide the cells' arrangement. Make sure to leave a 3-inch border along the edges of the plywood.
Next, solder two flat-tabbed wires at the back of every cell. Make sure the length of the wire is double the length of a cell.
Arrange the cells on the plywood. Solder the wires at the back of one cell to the next so that they all become connected.
Put a drop of silicone sealant at the back of each sell to glue it onto the plywood. A small drop will do. Let the sealant dry.
Connect the positive lead of one cell to the negative lead of the next cell. Repeat this process until you have one positive lead and one negative lead left. Parallel connections generate power while more series connections build up more voltage.
As for the last two leads, solder each of them to separate the insulated copper wire. The length of this wire depends on how far the solar panel position is from the power system.
Remember the four pieces of 1x1-inch lumber; these will be the boards that you will place on the borders of the plywood. Glue them onto the front of the plywood (where the solar cells are placed) using the silicone sealant and let it dry.
Turn to the back of the plywood. Drill pilot holes through the wood into the 1x1-inch lumber, but make sure the drill does not puncture through the lumber. Screw the four pieces of lumber into place.
As for the positive and negative leads, drill a hole for each of them at the bottom borders for the wires to pass through. Fill the two holes with silicone sealant so that the wires are kept in place. Drill another hole at the bottom but do not put sealant in it. It will serve as a drain hole in case of condensation.
Place a sheet of Plexiglas over the solar panel. Glue it onto the borders using the silicone sealant and let it dry. Once dry, screw the Plexiglas into place on the borders.
Lastly, place the panel in your desired position and connect the insulated copper wires to the home power system.
At this point, your homemade solar panel is done. Make sure to practice safety measures when doing this project. Remember: one solar cell generates a minimal amount of electricity. If you want to generate more electricity, you will have to create more panels.
Review to Pick Up the Best Company For How to Make Solar Panels
Article Source: http://EzineArticles.com/6420135
